Weekly Beginner's Taxiway 2020-12-05
Reviews, thoughts, and events from the week in RC Airplanes
Term of the Week
Aileron is a French word that means “little wing: or “fin.” The aileron is on the trailing edge of the wing and controls the roll of your aircraft.
Essentially, activating the aileron causes your plane to bank and thus turn.
There are two ailerons (one on each wing) that work in tandem to control the aircraft. These act differently from the rudder that also turns the aircraft. The rudder controls rotation around the vertical axis of your plane. The rudder controls the yaw of the plane and used while taxiing.
The ailerons are controlled by individual servos that are activated by the receiver. The receiver decodes the electrical directions from the transmitter in your hand.
Typically, both individual aileron wire leads are plugged into a “Y” harness, and the lead from the “Y” harness is plugged into a single receiver slot.
Plane Reviews and Tips
Turbine engines and beginner may be a bit of an oxymoron, but here is a quick flight video of the Bobcat Composite. Turbine engines are fast and would be considered a speed step up from EDF jets.
Fast RC Turbine Model Jet Bobcat Composite for beginner into Turbine Aeromodelling RC Airplane
Tim McKay has a wonderful video on airplane hatches. If you want to geek out on airplane parts, this is a video to watch. Model Airplane Hatches for Newbies
Your brushless motor not working? Here is a good description of a brushless motor and how to rewind it.
Tool of the Trade RC Airplane Stands
Airplane Stands come in all shapes and sizes and are something you need to quickly work on your planes and protect them from bumps and bruises. There are two types, the homemade and purchased. The homemade version is typically made from PVC pipe.
If you are making a stand, measure your planes and make sure you build the stand the right height and length.
Too low, and the plane’s rear wing will hit and too long and the plane will not be adequately supported on the fuselage.
The manufactured stands are typically adjustable and typically allow for assembly and disassembly in the field, thus allowing easier transport. This inexpensive tool is invaluable at the field. Whether you build a custom stand or purchase one, this is a key tool.